Adjusting Your Drive Ratio – Changing Your Sprockets for Maximum Performance

Adjusting Your Drive RatioAre you gearing up? Adding teeth? Or are you simply stuck in the stock compromise you’ve been given? Okay, maybe that’s not fair. But chances are, you can do better – and for less money than you think.

When you bought your motorcycle or ATV, it was full of compromise. It had to be. It didn’t really know you, or your abilities, or your physical size, or where you ride. This “compromise” is most evident in the stock tires and wheels, as well as the chain and sprockets.

All of these – except maybe wheels – are “wear” items that eventually need to be replaced. Tires may be the most evident of these. But did you know that a simple sprocket swap could do even more for your bike? We’re not just talking about when the original wears out. So we’ll explain gearing and sprocket sizes, as well as applications, and we’ll show you some of our favorite sprocket products.

Sprockets, or “chainwheels” more literally, are measured by their number of teeth.

Gearing Up
This may sound like you’re prepping your gear for a trip to the trails, but we’re talking about something else. You “gear up” or “gear down” by changing sprockets, front or rear, to different sizes. Because you can change either front or rear sprockets, it’s best to begin by determining their relationship.

Sprockets, or “chainwheels” more literally, are measured by their number of teeth. To determine the final drive ratio, divide the rear sprocket size, say 49 teeth, by the front or countershaft sprocket size, say 13 teeth (like a new Yamaha YZ250F). In this case, the Final Drive Ratio is 3.77 – the front sprocket revolves 3.77 times to make one complete revolution of the rear sprocket.

The final drive ratio on a motocross bike will likely stay close to 4.0. For street bike guys, there’s a much bigger spread of ratios depending on sportbike or standard. For sport ATV riders, the stock final drive ratio will generally be lower, around 3.0 or less.

Gearing up, like with a smaller rear sprocket, decreases the final drive ratio and adds more top speed to your motorcycle or ATV. Back to that YZ250F. If you replace its 49T rear chainwheel with a 52T – and that’s a big change – your final drive ratio is now 4.00 (52 divided by 13). You just “geared down.” That may sound backwards, but the relation is always to the front or countershaft sprocket, and in that relationship, you geared down. This number is most important when you’re changing gearing. It’s easy and beneficial to be scientific about this. And when you want to make a change, you should be scientific. Make one small change at a time, document it and test it before considering further changes.

Why Change the Drive Ratio?
Want the short answer? Gearing down by installing a larger rear sprocket (like with our YZ example) increases the final drive ratio and reduces top speed, but can increase acceleration.

Gearing up, like with a smaller rear sprocket, decreases the final drive ratio and adds more top speed to your motorcycle or ATV.

Short answers never tell the whole story, of course. Setting the gearing for any motorcycle or ATV presents a trade-off between low-end power delivery and top-end speed. If you like a nice blend of the two and are happy with the power delivery of your vehicle in stock form, then leave the drive ratio alone. Just keep an eye on your sprockets (and chain) for wear.

If you want better top-speed or stronger acceleration – and it’s not easy to get both – then gear up or gear down, and you can do so for $100 or less (sometimes way less).

If you’re a beginning rider, you might consider gearing down. Low-end power delivery and more effective acceleration will serve you better than top speed. Expert riders may already know how to get the best low-end delivery, and might want to gear up a vehicle for improved top-end power. But let’s look at specific applications to give a better answer.

ATV Gear UpATV and Off-road motorcycle
A technical track or trail loop with deep soil, sand or elevation changes will require Gearing Down. This will give you strong acceleration out of corners, and let your bike or ATV better use power to pull through the soil or up hills. You may have to shift more often, but you’ll get the strong pull you needed.

If your favorite track or trail is hard-packed with big sweeping turns, then you may want to Gear Up and make the most of your machine’s top-end power delivery. You will lose access to some low-end power, and may have to use more clutch for low-rpm control. In exchange, you’ll get more of what you want at higher rpm in improved top speed. You can also gear up if you’ve made other modifications to your bike or ATV that improve acceleration.

Dirtbike Gear Ratio Ride a Suzuki LT-R450 and want even better low-end power? Gear down. Switch that stock 36T rear sprocket for a 37T or 38T.

Ride a Kawasaki KX450F and want more top-end? Gear up. Switch that stock 50T sprocket for a 49T.

Street motorcycles
If you ride a sportbike on certain technical roads or race tracks, perhaps, you can gear down for best acceleration and low-end power delivery.

If you ride a sportbike on certain technical roads or race tracks, perhaps, you can gear down for best acceleration and low end power delivery.
For street riders specifically, changing gearing can help you tune your bike to a desired cruising rpm. For example, if your bike rolls down the freeway at 6000 rpm at 65 mph, you could gear up to lower that cruising rpm, reducing vibration and improving fuel mileage.

Changing gearing on street bikes can be more complicated than with a motocross bike or ATV. If you change the front sprocket, your street bike’s speedometer will very likely read incorrectly. You’ll need to correct that. Also, changing sprockets on a track-riding sportbike can change the effective wheelbase of the bike enough to affect handling. Those effects are not as pronounced on a dirt bike or quad.

The best steel sprockets use hardened and heat-treated steel.Sprocket Construction
Most sprockets are made from either steel or aluminum, or maybe even a mix of the two. Steel sprockets are generally less expensive, and better for longevity. Countershaft sprockets are often made of steel; they need to be durable and their small-size means weight is usually not an issue. The best steel sprockets use hardened and heat-treated steel.

Sprockets made of aluminum are significantly lighter, but have a shorter life span, and are more expensive than steel. For race bikes or ATVs, the weight savings can be huge, often a couple pounds. For added durability, aluminum can be anodized, but sprocket life span is not an issue for most racers.

A Couple of Our Favorites A Couple of Our Favorites
JT Sprockets makes more sprockets – about 18 million annually – than any other manufacturer in the world.

In recent years, JT has begun using more durable C49 steel with a high-carbon content. For competition-quality sprockets, JT uses 7075 T6 aluminum. Its high strength-to-density ratio makes it ideal for racing applications. JT’s countershaft sprockets are made of full heat-treated chromoly SCM415 steel. Many other manufacturers simply “surface harden” their countershaft sprockets.

JT has fitment for more than 95 percent of bikes and ATVs in use today.

You may think of Renthal primarily as a handlebar maker, but the company’s chainwheels are chosen by hundreds of champion racers. Renthal makes sprockets for off-road and road applications, mainly from 7075 T6 aluminum. The company’s unique Twinring off-road chainwheel features steel teeth on an aluminum inner ring for a product that is lightweight and durable.

All of Renthal’s chainwheels are CNC machined for precision, and to provide a combination of lightweight and strength. Renthal front chainwheels are made from nickel-chrome-molybdenum alloy steel, and are case hardened.

When changing your sprockets due to wear, you will also need to replace your chain. You Need to Know This
When changing your sprockets due to wear, you will also need to replace your chain. The chain and sprocket relationship is best when the two wear together. Mixing an old chain with a new sprocket – or vice versa – will shorten the life of either. Not a good idea. And if you make a big change in sprocket size, you may need a shorter or longer chain.

Changing one tooth on the countershaft sprocket has a more significant impact on the gearing than changing one tooth on the rear sprocket. Plus, countershaft sprockets cost less. But, it’s most often best to make changes with the rear sprocket. You get more fine adjustments, and that’s generally desired.

Avoid using a smaller-than-stock front sprocket. On a smaller sprocket, the drive chain must turn a tighter radius, which increases friction and decreases the life expectancy of the chain.

Shop At Chaparral Motorsports

  • Motorcycle Tires

    Shop for discount motorcycle tires from the leader of motorsports. Find the best tire deals online.

  • Motorcycle Helmets

    Find a great selection of motorcycle helmets from top brands for Men, Women and Kids.

  • Motorcycle Parts

    Superior selection of motorcycle parts for ATV, dirt bike, street bike, sport bike and scooter. You won't find a better selection anywhere else.

  • Motorcycle Jackets

    The best selection and deals on motorcycle jackets for Men, Women and Kids can be found at Chaparral Motorsports.

Comments

  1. 1 tooth on the front is equal to 3 teeth on the back.

  2. Sir,
    i really need your advise….am riding yamaha fz 16, its only 153 cc bike…
    i already made some tuning with its air filter to increase the acceleration…powerded by K&N air filter…
    also wanting to do some tuning with its rear sprocket to get better acceleration…its stock sprocket has 44 teeth..so, am confusd hw much teeth I need to addon for the excesive acceleration for stunting purpose….waiting for your advise Thanks!

  3. sir what if your wheels on front is 21 and in in rear is 18 what sprocket and gear for that purpose for lservicing in high speed

  4. I'm making my 01 yamaha worrier my daily driver so I want higher top speed so I can ride on the freeway so what size sprocket should I go to much help please already in the process of getting a registered plate.

  5. Hi guys, I just wanted to ask you about my issue.

    My bike has chain of the size 428×108 and sprockets 14T, 42T.

    I have bought new set but in the box are sprockets of different size: 13T & 44T !

    Are they going to affect gear ratios and RPM's at a given speed ? It seems to me logical as on the bicycle… but I can't image the real effect. I wouldn't like to loose max. speed which is about 100km/h with this kind of the bike… :(
    Can I use them or better take it back and get correct ones?

    Thanks for help.

  6. Martin, yes the new sprockets will make a slight change in your bike's performance. You should notice a slight gain in bottom end power with a slight decrease in overall top end speed. Yes you can use them, it's up to you if you want to return them. It mostly depends on the type of riding you do most. If its wide open flat area riding then you'll probably want to stick with the original setup. But if its lots of on/off throttle in turns and tight trials you may notice that you like the new gearing ratio as it should make the bike a bit more responsive and funner to ride in tight riding conditions.

  7. Chaparral Motorsports Thanks a lot for your response, I appreciate it !

  8. I'll just leave it stock and adjust myself with it.

Speak Your Mind

*